Frequently Asked Questions
Is it possible to connect the Cocoon Table / Built-in Burner to the natural gas network?
All our Cocoon Tables and Built-in Burners can be adjusted to make them ready natural gas.
Please contact Happy Cocooning for further details.
What is the heating capacity of the Cocoon Tables?
The Cocoon Tables have a heating capacity of 12 kW and 19.5 kW.
The Built-in Burners have a heating capacity of 6.5 kW and 12 kW.
What is the consumption of the Cocoon Table?
This depends on the capacity of the Cocoon Table or Built-in Burner. The consumption also depends on the height of the flame. In practice it is possible to burn for approximately 16-20 hours, with a gas bottle of 10kg.
From which material is made the Cocoon Tables?
The Cocoon Tables are made of composite. This fabric combinated with the polyester mats, provides a solid unit. This composit is resistant to heat, cold and rain. When you are not using the Cocoon Table, please cover it with the supplied protection cover or lid for the Built-in Burners.
Is it possible to place the gas bottle underneath the Cocoon Table?
This is only possible by the Bar table and the Lounge&Dining line Cocoon Tables. We have our Lounge & Dining collection, specially developed to place a gas bottle underneath.
All our other models are not appropiate to place a gas bottle inside. You have to place the gas cylinder next to the Cocoon Table. To cover this gas cylinder we have the Enclosure or PVC Cover. Also there is a protection layer for the gas hose to camouflage the hose and avoid tripping hazard.
Where can I buy a product of Happy Cocooning?
Look at shops and enter your city or zip code.
Otherwise, contact Happy Cocooning for the right information.
Whit what kind of material can I clean the Cocoon Table?
Composite tables can be cleaned by using lukewarm water. Don’t use abrasives. Teak Tables can be cleaned by using a teak cleaner. The composite tables can be painted with outside water-based paint.
What about the safety of the product?
All our Cocoon Tables are KIWA GASTEC approved.
What sort of gas regulator do I need?
You will need a 30Mbar gas regulator (uni x 1/4 links).